How to force update Autel TS601?
Before attempting an update, ensure the tool is successfully registered on the Autel website.
1. Download and install the Maxi PC Suite from the following link:
2. Connect the tool to your PC using the included USB cable and set it to Update Mode. If you cannot set it to Update Mode, press and hold the left scroll button while connecting the tool to your PC with the USB cable to force it into Update Mode.
3. Open Maxi PC Suite, log in with your registered ID and password, and select the update package in the desired language.
4. After updating, verify that the tool starts up normally.
If you encounter any problems during the update, please provide the S/N and pictures of any error messages for troubleshooting.
Related Articles
Can Autel TPMS tools program third-party TPMS sensors?
Autel TPMS tools, including models like TS401, TS408, TS408S, TS508WF, TS601, and others, are only capable of programming Autel MX-Sensors. They cannot be used to program other aftermarket TPMS sensors. However, while Autel TPMS tools can only ...
What to do if my Autel TS601 shows a blue screen and won't start?
To resolve this issue, you need to format the SD card and perform a re-upgrade. Follow these steps: 1. Remove the SD card from the device. 2. Insert the SD card into an SD card reader connected to your computer. 3. After formatting, reinsert the SD ...
What to do if the TPMS light cannot be cleared after successfully programming the Mx-sensor with Autel TS601?
If you're unable to clear the TPMS light after successfully programming MX-Sensors with the TS601, follow these steps: 1. Activate All Sensors: Ensure that all four TPMS sensors are activated. 2. Reprogram via OBD: Use the "Copy by OBD" method to ...
What to do when my AL319, AL539, or AL539B displays "Program mode see user manual"?
1. Download the MaxiLinkII software from the Autel website using the following link and install it on your PC: https://www.autel.com/download.jhtml (MaxiLinkII software under Autel Update Tools) 2. Download the update pack with the desired language ...
How to delete or locate software (using BMW as an example)？
First, check for a BMW folder in the following path: "ES File Explorer -> Scan -> Vehicle -> Europe -> BMW." If you find it, please delete it. Also, look for and delete the folder if it exists under "ES File Explorer -> Scan -> Download" and "Maxisys ...