How to transfer the free software from my faulty AP200 to a new one?
To transfer your software from a damaged AP200 to a new device, please provide us with the serial numbers of both the old and new AP200 units. We will coordinate with Autel's technical team to complete the transfer within one business day. Please note that once the transfer is complete, the previous AP200 will no longer be usable.
Related Articles
How to check if an MX-Sensor is faulty?
Please use Autel TPMS tools, such as the TS408 or TS601, to test whether the sensor is functioning properly. Send us a picture of the test result for confirmation. Steps: 1. Power on the device. 2. Navigate to TPMS. 3. Select the corresponding menu ...
How to delete or locate software (using BMW as an example)？
First, check for a BMW folder in the following path: "ES File Explorer -> Scan -> Vehicle -> Europe -> BMW." If you find it, please delete it. Also, look for and delete the folder if it exists under "ES File Explorer -> Scan -> Download" and "Maxisys ...
What to do if my received device is already registered?
Please provide us with the serial number of the device and your Autel ID. We will either transfer the device to your account or cancel its registration if it was registered within one month. If the device has been registered for more than one month, ...
Difference Between Data Log and Maxi Tool Log
Data Log: If you encounter a problem after entering the diagnostic or service menu, you can send a data log. This can be used for log analysis regardless of whether it is a communication or execution function issue. Maxi Tool Log: For issues not ...
What to do when my AL319, AL539, or AL539B displays "Program mode see user manual"?
1. Download the MaxiLinkII software from the Autel website using the following link and install it on your PC: https://www.autel.com/download.jhtml (MaxiLinkII software under Autel Update Tools) 2. Download the update pack with the desired language ...