How to upgrade or change the language for ML619, ML629, Diaglink, MD802, and MD806 Pro?
To upgrade or change the language for your device, follow these steps:
First, provide the serial number (SN) and the desired language. Language change authorization is usually granted within one business day. Then proceed with the following steps:
1. Download and install the Maxi PC Suite from this link on your PC:
2. Remove the SD card from the device and connect it to your PC using an external SD card reader.
3. Launch the Maxi PC Suite, log in with your registered ID and password, and download the necessary software onto the SD card.
4. Reinsert the SD card into the device and verify that it starts up normally.
Related Articles
How do I upgrade or change the language on the AL319/AL539/AL539B device?
1. Download the MaxiLinkII software from the Autel website using the following link and install it on your PC: https://www.autel.com/download.jhtml (MaxiLinkII software under Autel Update Tools) 2. Download the update pack with the desired language ...
What to do if it shows "The current language is not authorized, please contact the dealer authorize"?
If you see a message saying "The current language is not authorized, please contact the dealer to authorize" when selecting a language, please send us your device's serial number (S/N) and the language you wish to use. You can locate the S/N on the ...
What to do when my AL319, AL539, or AL539B displays "Program mode see user manual"?
1. Download the MaxiLinkII software from the Autel website using the following link and install it on your PC: https://www.autel.com/download.jhtml (MaxiLinkII software under Autel Update Tools) 2. Download the update pack with the desired language ...
What to do If my scanner is stuck on the startup screen?
1) If your device is still under a valid subscription, you can flash the device. Please note that this will erase all data. 2) If your device is out of subscription, you will need to pay the annual fee to download all software after flashing the ...
How to delete or locate software (using BMW as an example)？
First, check for a BMW folder in the following path: "ES File Explorer -> Scan -> Vehicle -> Europe -> BMW." If you find it, please delete it. Also, look for and delete the folder if it exists under "ES File Explorer -> Scan -> Download" and "Maxisys ...